Windiows Safe Mode | Xp safe mode | Reboot Safe Mode

[Introduction]

This subject will touch upon to explain the safe boot options (Safe Boot) multi-supported Windows.
These options are used to load a small group of drivers.
You can use these options to run Windows to modify the registry or load or remove drivers.
]  Safe mode] 

To use one of the options Safe mode, follow these steps:  

1) Restart your computer and start pressing the F8 key on your keyboard.
For computers configured to run multiple operating systems, you can press the F8 key when you see the Boot Menu.
2) Select one of the options when you see the list of Windows Advanced Options, as it is in the picture below, then press ENTER.

3) When you see the Boot menu appears again, the words "Safe Mode" blue bottom of the screen, select the installation that you want to run, and then press ENTER.

 [Description of the Safe Boot options] 

1) Safe Mode
(SAFEBOOT_OPTION = Minimal)
This option uses a small set of device drivers and services to run Windows.
2) Safe Mode with Networking
(SAFEBOOT_OPTION = Network)
This option uses a small set of device drivers and services to run Windows as well as the drivers needed to load the network.
3) Safe Mode with Command Prompt
([SAFEBOOT_OPTION = Minimal [AlternateShell)
This is similar to option set Safe Mode, although the difference is in the running Cmd.exe instead of Windows Explorer
4) Enable VGA Mode
This option running Windows in a 640 × 480 using the current video driver (other than Vga.sys).
This mode is useful if the display is configured in the preparation of the screen can not be displayed.
* Note the development and the development of Safe mode Safe mode with Networking to download the driver Vga.sys instead.
5) Last Known Good Configuration
This option to run Windows using the previous good configuration.
6) Directory Service Restore Mode
This mode is valid for domain controllers based on Windows only. The reform of this situation, the directory service.
7) Debugging Mode
This option run debug mode in Windows.
You can send debugging information via a serial cable to another computer running the debugger.
This situation has been configured to use COM2.
8) Enable Boot Logging
This option run the registry when you start your computer using any of the Safe Boot options except option Last Known Good Configuration.
Is recorded in the text of the Boot Logging Ntbtlog.txt file is located in the% SystemRoot%.
9) Starts Windows Normally
This option running Windows in Normal mode.
10) Reboot
This option to restart the computer.
11) Return to OS Choices Menu
For computers that are configured to run more than one operating system, this option to return to the list of Boot.
  [General information]
** Driver is used the default Microsoft VGA display screen resolution 640 × 480 and color quality of 16 colors.
** You must be logged on to all of the settings through the area or the local Security Accounts Manager, based on the safe boot mode that is selected.

  [Explanation applies to the version of Windows XP by:]
Microsoft Windows XP Home Edition
Microsoft Windows XP Professional Edition
Microsoft Windows XP 64-Bit Edition
According to the information essential for other systems such as (95/98/Vista/2000)